Simulation of circuits containing vacuum tubes
Presentation of the application note [X7]

[X7] F. Broydé, Ch. Hymowitz, "Modeling Vacuum Tubes, part II", Intusoft Newsletter, April 1994.

Downloading the document as a .pdf file (196 kB). This document is subject to the Copyright of Excem and Intusoft. We have removed from this document everything that did not belong to our work.

     This application note is essentially based on the SPICE code and the comments of the Extubes.lib tube model library created by Broydé and Clavelier, on their simulation of a MOSFET-pentode amplifier, and on their translation of the Electronique Radio Plans paper [B23]. This amplifier was actually build and used for special EMC measurements where a high amplitude wide-band RF current source was needed. The actual circuit is only slightly different and implements an Eimac 8072 beam tetrode (with a 1200 V power supply).

Back to the home page

Back to the Club Excem

Back to the Broydé & Clavelier approach

Web site:
URL : © Excem 2000, 2014
Last update: March 12, 2014 reply to: